Reduce Energy
Usage and Save on Monthly Bills
Reducing home energy usage can add
comfort, provide long-term financial gains for consumers and cut
down on monthly bills. “Energy conservation” means taking steps and
adopting habits that decrease the amount of energy used to operate
one’s home. “Energy efficiency” means using improved technology to
decrease energy demand. Both of these ideas offer homeowners ways to
reduce their energy bills – ranging from very simple efforts like
closing windows and turning off lights to installing new,
high-efficiency heating and cooling equipment and using
energy-efficient appliances.
According to the National Association
of Home Builders (NAHB) Research Center, the typical U.S. household
spends $1,000 to $1,500 each year on utility bills. Of this total,
energy usage breaks down this way:
-
Heating and cooling (50 percent of
energy usage)
-
Appliances and lighting (one-third of
usage)
-
Water heating (one-eighth of usage)
The NAHB Research Center suggests some
conservation and efficiency improvements that most homeowners can
undertake this summer:
Set your thermostat to a higher
temperature in the summer. Or, install a programmable thermostat
($40-$100) that you can program to match the heating and cooling of
your home to your own personal schedule. These units typically offer
savings of 10 to 15 percent without compromising comfort.
Check and change air filters
regularly. Dirty filters can reduce heating, ventilation, and
air conditioning (HVAC) system efficiency. In the event you need to
replace your central air conditioning unit, ensure that the new unit
has at least a Seasonal Energy Efficiency Ratio (SEER) 12 rating.
For room air conditioners, look for units that have a high Energy
Efficiency Ratio (EER). For both types of air conditioners, the
higher the SEER or EER rating, the more energy efficient the unit.
Replace high-use lights with compact
fluorescent lamps. Light fixtures used more than two hours per
day on average are good candidates for replacement with compact
fluorescent lamps. The energy bill savings will more than pay for
the extra cost of the lamps over their lifetime, and you will have
to replace fewer lamps because fluorescent lamps last ten times
longer than ordinary light bulbs. Installing motion sensors or
timers on outdoor lights, instead of leaving the lights on during
nighttime hours, can also help to reduce the electricity bill.
Look for sources of air leakage in
your house. Outdoor air leakage comprises up to 30 percent of
the overall heating and cooling load, so cutting down on air leakage
offers significant savings for a job that requires little in the way
of costs. Common products like weather stripping can be used to plug
leaks from cracks and holes in door frames, windows and attic access
hatches.
Check insulation levels and possibly
add additional insulation in attics and crawlspaces. Sioux
Valley Energy recommends R38 insulation levels for your attic in
your home. This conservation effort decreases heating and cooling
costs and increases comfort.
Check ducts. For homes with
forced-air heating/cooling systems, seal duct joints with mastic or
high-quality, UL-listed foil-backed duct tape and insulate ducts in
unconditioned spaces like attics and crawlspaces.
Consider alternatives to help keep
your home cool. Fans and dehumidifiers use less energy than air
conditioners and can help to make the home comfortable during warm
months.
When buying or replacing appliances,
choose energy efficient models. Manufacturers have made great
strides over the past 15 years in improving the performance of
refrigerators, dishwashers, and clothes washers and dryers. Read the
appliance’s EnergyGuide label, as it will provide an estimate of the
unit’s annual operating costs.
Weatherize your windows and consider
replacing single-pane windows. Buying and installing double-pane
windows that have high-performance glass (e.g., low-emissivity
“low-e,” coated or solar control spectrally selective) and are
filled with gas may help you downsize your home’s heating and
cooling equipment since energy efficient windows help reduce heat
loss in the winter and heat gain in summer.
Use less hot water. Water heating
typically accounts for 10 to 25 percent of the energy used in the
home. The less hot water you use, the less your water heater has to
work. To accomplish this, turn down the water heater’s thermostat
setting to 115º to 120º F; buy an energy efficient water heater;
install non-aerating, low-flow faucets and showerheads; use the
“warm” or “cold” water setting on your clothes washer instead of
“hot”; and set your dishwasher to “energy saver” or “water saver.”
Strategically place trees and shrubs.
Deciduous trees planted on the west and south sides of your home
help to keep your house shaded during the day’s peak heating times.
Practice conservation habits to save
energy. Turn off lights that aren’t being used, take shorter
showers, and run the dishwasher only for full loads. All of these
small steps can have a big impact on utility bills.
For more
information on energy efficiency, as well as green building
activities, visit the NAHB Research Center’s Web site at
www.nahbrc.org.